In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the house, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck to oxygen mask for dog your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are level and make certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll need to do some sanding to make sure that it is safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.